Bernina 430 Bedienungsanleitung PDF herunterladen (Seite 20)

12/13/10

Double Needle Stitching

Fabric: Firm woven fabric, 4” x 6” and

Lightweight tear-away stabilizer, 4” x 6”

Needle: 2.0mm or 3.0mm Double Needle

Thread: Two spools, 30 wt. cotton embroidery

Needle Position: center

Presser Foot: Open Embroidery Foot #20/20C/20D

Touch CLR to clear any previous stitch alterations.

Place the stabilizer behind the fabric.

Insert the Double Needle and thread the machine with 2 colors of

thread. Make sure you have the appropriate stitch plate (not the

straight stitch plate).

Engage the Double Needle Limitation function or Security Program,

if available, selecting the appropriate Double Needle option.

Note: If these features are not available, check to be sure the

needles will not strike the foot by turning the handwheel to walk

the machine through the first stitch.

Starting with the stitches shown above (Zigzag, Running, and

Feather), select several different stitches and sew across the fabric

randomly. Carefully check the stitch width before sewing to avoid

breaking your needle.

Double Needle Tips

• When doing decorative needle work you should sew slowly –

change motor to half speed if this option is available.

• If your model does not have a Double Needle Limitation function

or Security Program, use this formula to determine the widest

stitch width possible before the needle strikes the presser foot:

Widest width of the machine

— Width between the two needles

Widest stitch width possible

Do you know how to:

▪ Thread for Double Needle sewing?

▪ Insert a Double Needle?

▪ Turn a corner with a Double Needle?

Double Needles

available in sizes:

1.6/70 – 8.0/100

1 2 ... 15 16 17 18 19 20 21 22 23 24 25

Keine Kommentare

Bernina 430 Bedienungsanleitung Seite 20