Bernina 430 Bedienungsanleitung Seite 8

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 25
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 7
8
12/13/10
Pattern Functions
x
Pattern Begin
Pattern End
Pattern Repeat
Pattern Extend
Touch CLR to clear any previous stitch alterations.
Place the stabilizer behind the fabric.
Pattern Begin and Pattern End
Select the satin stitch heart pattern.
Sew 2½ patterns, stopping in the middle of the third pattern. Lift
the presser foot and move the needle down about an inch and then
begin sewing again. The pattern will start forming where you left off.
After completing the interrupted heart, start the final heart and
press Pattern End. The machine will stop stitching when the
pattern is complete. Tip: To make sure you have a complete
pattern, depress the foot control and do not remove your foot
until the machine stops.
Move to a new position and sew 2½ patterns, stopping in the
middle of the third pattern. Lift the presser foot and move the
needle down about an inch. Before starting to sew again, press
Pattern Begin. Start sewing; the pattern will start forming at the
beginning. Again, press Pattern End when you start the final heart.
Pattern Repeat and Pattern Extend
Select the satin stitch scallop; engage Pattern Repeat 1x.
Sew until the machine stops; you will have 1 scallop.
Engage Pattern Repeat 3x. Sew until the machine stops; you
will have 1 stitch pattern. Note: In this case, one stitch pattern
equals the repeated group of three scallops.
Engage Pattern Extend 3x and Pattern Repeat 1x.
Sew until the machine stops; you will have 1 stitch
pattern. Note: In this case, one stitch pattern equals
one extended scallop. As the stitch pattern is extended
(lengthened), the stitch density is maintained.
.
Fabric: Firm woven fabric, 4” x 6” and
Lightweight tear-away stabilizer, 4” x 6”
Needle: 80/12 Universal
Thread: 30 wt. cotton embroidery
Needle Position: center
BERNINA Presser Foot: Open Embroidery Foot #20/20C/20D
Do you know how to:
Recognize the four different pattern
functions (which icon stands for each)?
Seitenansicht 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 24 25

Kommentare zu diesen Handbüchern

Keine Kommentare